Measurement Mode (Off)
(Original Document)
About us
At a Glance
In this mode, the axis control channel only reports back information on position and current speeds. Movement of the moving part is not monitored.
The position loop is inoperative and the variable speed controller enable relay is unlocked, whatever the state of the variable speed controller enable bit ENABLE (%Qxy.i.9).
Description of Movement / Speed Field
This table shows the display zones of the Movement/ Speed field:
Display zone
Description
X
Displays the moving part position using the measurement unit defined in the configuration.
F
Displays the moving part speed using the measurement unit defined in the configuration.
Description of Axis Field
This table shows the display zones for the Axis field:
LED
State
Indication
OK
Lit
Axis in operational state (no blocking fault)
Referenced
Lit
Referenced axis
Stopped
Lit
Moving part stationary
Description of Faults Field
This table shows the display and command zones for the Faults field:
LED / Button
State
Indication
Hardware
Lit
External hardware fault (e.g. encoder, variable speed controller, outputs, etc.)
Axis
Lit
Application fault (e.g. following error, software limits, etc.)
Ack.
/
Fault acknowledgment button. Activating this button acknowledges all faults which have disappeared