General Characteristics
(Original Document)
Table of Characteristics
This table shows the general characteristics of TSX CAY modules:
Maximum frequency of counting:
absolute SSI encoder: transmission CLK frequency
incremental encoder
200 kHz
500 kHz x 1
250 kHz x 4
Current used on internal 5 V (ventilator in operation)
Module
Typical
Max.
CAY 2•
CAY 4•/33
1.1 A
1.5 A
1.4 A
1.8 A
Current used on the 24V sensor/
pre-sensor, outputs OFF
CAY 2•
CAY 4•/33
15 mA
30 mA
18 mA
36 mA
Current consumed by the module on the 10/30 V encoder at 24V (1)
CAY 2•
CAY 4•/33
11 mA
22 mA
20 mA
40 mA
Power dissipated in the module
CAY 2•
CAY 4•/33
7.2 W (2)
10 W (2)
11.5 W (3)
17 W (3)
Insulation resistance
> 10 MΩ under 500 VDC
Dielectric rigidity with ground connection or 0 V logical PLC
1000 Veff 50/60 Hz per min
Operating temperature
0 to 60 °C
Storage temperature
-25 °C to 70 °C
Hygrometry (without condensation)
5% to 95%
Operating altitude
< 2000 m
Note (1): absolute encoder and supply used exclusively in 24V.
Note (2): normal conditions of use: one active auxiliary input per channel (under 24V).
Note (3): "worst" case and extreme conditions: all auxiliary inputs active (under 30 V).
This module has a mini internal ventilator, which enables good working order in all temperatures. The ventilator is started up when necessary by the module’s internal temperature sensor (triggered at an external temp. of 45 °C).
It is possible to use external ventilation blocks (TSX FAN••), if the conditions around the module surpass the above parameters.