Field Wiring Guidelines
Original instructions
About us
Overview
This section contains wiring guidelines and precautions.
Terminal Connector
To connect field devices to the I/O base, you need a field wiring terminal connector. Schneider Electric sells terminal connectors in sets of three.
Type
Part Number
Screw-in
170 XTS 001 00
Spring-clip
170 XTS 002 00
Busbar May Be Required
Depending on the type of field devices you are using, you may need a 1-row busbar. The following busbars are available from Schneider Electric.
Type
Part Number
Screw-in
170 XTS 006 01
Spring-clip
170 XTS 007 01
Mapping Terminal Blocks
CAUTION
POTENTIAL FOR SHORT CIRCUITS AND/OR POWER-UP SPIKES
Provide external fuses on the operating voltage to protect the module. Appropriate fuse values are shown in the wiring illustration. An unprotected module may be subject to short circuits and/or power-up spikes.
Failure to follow these instructions can result in injury or equipment damage.
The following table shows mapping terminal blocks and optional busbars.
Row
Terminal
Function
1
Fuse 1, Fuse 2
Output fuses
2
1, 3, 5, 7
Outputs for group 1
9,11 ,13, 15
Outputs for group 2
17
Neutral for outputs (1N)
18
Line for outputs (1L1)
3
1 ... 16
Neutral for individual outputs (1N)
17
Neutral 120 VAC for module (N)
18
Line 120 VAC for module (L1)
4
1 ... 18
Protective earth (PE)