This user guide describes the Momentum models 170ENT11001 and 170ENT11002 Ethernet communication adapters. These communication adapters plug onto any model of Momentum I/O module and provide a direct connection to Ethernet-based networks. The adapter conforms to the requirements of the Ethernet Communication Network.
Throughout this material we use the following naming scheme.
|
Full Name of Product
|
Name Used in this Guide
|
|
Momentum model 170ENT11001 Ethernet communication adapter
|
Momentum 170ENT11001 or the adapter or device
|
|
Momentum model 170ENT11002 Ethernet communication adapter
|
Momentum 170ENT11002 or the adapter or device
|
The Momentum 170ENT11001 and the Momentum 170ENT11002 adapters provide a direct connection to Ethernet-based networks for the entire family of Momentum I/O modules. This connectivity enables communications with a full range of Ethernet TCP/IP compatible control products, a range that includes programmable controllers, industrial computers, motion controllers, operator control stations, host computers, and other controls.
Both the Momentum 170ENT11001 and Momentum 170ENT11002 are available from Schneider Electric. The Momentum 170ENT11002 replaces the Momentum 170ENT11000.
The Momentum 170ENT11001 offers the following features.
-
10/100Base-T
-
backwards compatible
-
enhanced power-up error detection
Momentum 170ENT11001 will detect and indicate default IP address condition.
-
embedded Web pages for configuration
A series of Web configuration pages enables you to configure some options in the system.
Configure the Momentum 170ENT11001 in its default (out-of-the-box) condition in the absence of a BOOTP / DHCP server or previous configuration.
-
embedded Web pages for diagnostics
A series of Web diagnostic pages enables you to monitor the health of the system.
-
enhanced LED error reporting
-
SNMP
Simple Network Management Protocol
All Ethernet devices will support Simple Network Management Protocol (SNMP). All Ethernet devices will support both public MIBs and the Schneider Electric Private MIB for device management on the network.
-
FDR
Fast Device Replacement
The adapter supports Fast Device Replacement—client
As an FDR client the adapter will retrieve its IP and configuration parameters from a DHCP server and FTP server respectively. The presence or absence of a role name will control participation in an FDR environment.
