CCOTF Guidelines
Original instructions
About us
Recommendations
Follow these recommendations before performing a CCOTF modification.
NOTE: Read and understand the preventive measures that are described in Electrical installation guide.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Do not handle a module that has a voltage level of 30 Vrms or 42.4 Vdc or higher.
Failure to follow these instructions will result in death or serious injury.
WARNING
UNEXPECTED EQUIPMENT BEHAVIOR
  • Before performing any CCOTF, verify that your system responds appropriately.
  • Modifications made when the Online modification in RUN or STOP check box is selected in Control Expert have an immediate impact on the system.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
In Control Expert, you can configure your project to allow online modifications by double-clicking the CPU in the PLC bus (or right-click Open Module), selecting the Configuration tab, and selecting the Online modification in RUN or STOP check box. When this check box is selected, any modifications you make may have an immediate impact on the system.