Detailed description

The output of signals takes place immediately during block processing as well as during normal I/O processing at the end of a cycle.

The output module must be in the local rack of the PLC. It must also be entered into the I/O map of its configuration. The I/O module is addressed using rack number and slot number.

Parameter description

Status report STATUS

The STATUS parameter may contain the following messages:

Status	Meaning
0000	Operation OK
2001	invalid operation type (e.g. the I/O module addressed is not an input module)
2002	Invalid rack or slot number (I/O map in the configurator contains no module entry for this slot)
2003	invalid slot number
F001	Module not OK