Language Objects Associated with Configuration
Original instructions
About us
At a Glance
The configuration of an analog module is stored in the configuration constants (%KW).
The parameters r, m, and c shown in the following tables represent the topologic addressing of the module. Each parameter had the following signification:
BME AHI 0812, BMX AMI 0410, BMX AMI 0800, and BMX AMI 0810 Configuration Objects and Inputs of BMX AMM 0600
The process control language objects associated to the configuration of the BME AHI 0812, BMX AMI 0410, BMX AMI 0800, and BMX AMI 0810 modules include the following:
Addresses
Description
Bits Meaning
%KWr.m.c.0
Channel range configuration
Bit 0 to 5: electric range (hexadecimal value)
Bit 7: 0=electrical range (always 0)
%KWr.m.c.1
Scale/User scaling min value
-
%KWr.m.c.2
Scale/User scaling max value
-
%KWr.m.c.3
Over range below value
-
%KWr.m.c.4
Over range above value
-
%KWr.m.c.5
Channel treatment configuration
Bit 0: 0=Mast mode, 1=Fast mode
Bit 1: 0=channel disabled, 1=channel enabled
Bit 2: 0=sensor monitor off, 1=sensor monitor on
Bit 7: 0=Manufacturer scale, 1=user scale
Bit 8: over range lower threshold enabled
Bit 9: over range upper threshold enabled
BMX ART 0414/0814 Configuration Objects
The process control language objects associated to the configuration of the BMX ART 0414/0814 modules include the following:
Addresses
Description
Bits Meaning
%KWr.m.c.0
Channel range configuration
Bit 0 to 5: Temperature range (hexadecimal value)
Bit 6: Temperature range (0=°C, 1=F°)
Bit 7: 1=Temperature range
Bit 8: 0=rejection 50 Hz, 1=rejection 60 Hz
%KWr.m.c.1
Scale/User scaling min value
-
%KWr.m.c.2
Scale/User scaling max value
-
%KWr.m.c.3
Over range below value
-
%KWr.m.c.4
Over range above value
-
%KWr.m.c.5
Channel treatment configuration
Bit 0: 0=Standard mode (always 0)
Bit 1: 0=channel disabled (only in Fast mode), 1=channel enabled
Bit 2: 0=sensor monitor off, 1=sensor monitor on
Bits 3 to 6: CJC Configuration Mode for channels 0/3:
  • Bit 3=0 and Bit 4=0: Int. Telefast,
  • Bit 3=1 and Bit 4=0: External RTD,
  • Bit 3=0 and Bit 4=1: CJC on channels 4/7.
Bits 3 to 6: CJC Configuration Mode for channels 4/7:
  • Bit 5=0 and Bit 6=0: Int. Telefast,
  • Bit 5=1 and Bit 6=0: External RTD.
Bit 7: 0=Manufacturer scale, 1=user scale
Bit 8: Over range lower threshold enabled
Bit 9: Over range upper threshold enabled
BME AHO 0412, BMX AMO 0210, BMX AMO 0410, and BMX AMO 0802 Configuration Objects and Outputs of BMX AMM 0600
The process control language objects associated to the configuration of the BME AHO 0412, BMX AMO 0210, BMX AMO 0410, and BMX AMO 0802 modules include the following:
Addresses
Description
Bits Meaning
%KWr.m.c.0
Channel range configuration
Bit 0 to 5: Electric range (hexadecimal value)
Bit 8: Fallback mode (0=Fallback, 1=Maintain)
Bit 11: Actuator wiring control (0=disabled, 1=enabled)
Bit 14: Output lower overshoot below range valid (0=disabled, 1=enabled)
Bit 15: Output upper overshoot above range valid (0=disabled, 1=enabled)
%KWr.m.c.1
Scale/User scaling min value
-
%KWr.m.c.2
Scale/User scaling max value
-
%KWr.m.c.3
Overshoot below value
-
%KWr.m.c.4
Overshoot above value
-