Electrical Characteristics of the BMX P34 xxxxx Processors
Original instructions
About us
General
The processors can support certain devices which do not have their own power supply. It is, therefore, necessary to take the power consumption of these devices into account when establishing the overall power consumption breakdown.
Processor Power Consumption
The following table shows the power consumption for all the BMX P34 xxxxx processors with no connected devices.
Processor
Average Consumption
BMX P34 1000
72 mA
BMX P34 2000
72 mA
BMX P34 2010/20102
90 mA
BMX P34 2020
95 mA
BMX P34 2030/20302
135 mA
NOTE: The processor power consumption values are measured at the 24 V_BAC output of the power supply module, which is the only power supply output used by the processors.
NOTE: When a device consumes power on the processor serial port connection, its power needs to be added to the power consumed by the processor. The power supplied by the serial port is 5 VCC/190 mA.
NOTICE
IMPROPER POWER SUPPLY
Only use network power-supplied devices tested by Schneider Electric.
Failure to follow these instructions can result in equipment damage.
NOTE: It is possible to use network power-supplied devices not tested by Schneider Electric. However, their operation is not guaranteed. For further information, please contact your Schneider sales office.
Processor Dissipated Power
The following table shows the average dissipated power for all the BMX P34 xxxxx processors with no connected devices.
Processor
Average Dissipated Power
BMX P34 1000
1.7 W
BMX P34 2000
1.7 W
BMX P34 2010/20102
2.2 W
BMX P34 2020
2.3 W
BMX P34 2030/20302
3.2 W