Presentation and Wiring

Illustration

The following figure shows the power supply module.

LED Area

Model Number, Module Description, Color Code

Field Wiring Connector

Field Wiring Connector Cover

Removable door

Customer Identification Label, (Fold label and place it inside door)

NOTE: When field wiring the power supply module, the maximum wire size that should be used is 1 - 14 AWG or 2 - 16 AWG; the minimum is 20 AWG.

NOTE: The tightening torque must be between 0.5 Nm and 0.8 Nm.

NOTICE

DESTRUCTION OF ADAPTER

Before tightening the locknut to the torque 0.50...0.80 Nm, be sure to properly position the right-angle F adapter connector.
During tightening, be sure to maintain the connector securely.
Do not tighten the right-angle F adapter beyond the specified torque.

Failure to follow these instructions can result in equipment damage.