The CableFast cabling D block is used for sensors requiring either 2- or 3-wire electrical interfaces. A fuse per group is supplied to accommodate the I/O module (4) groups.
The following figure shows the 140 CFD 032 00 terminal block.
The following are the application notes for the 140 CFD 032 00 module.
-
Configuration – arranged in four groups of eight I/O points. Each input is allocated three terminals.
-
Compatibility – this terminal block provides 0.8 A group fusing connection points for 3- and 2-wire proximity switches and is used with the following modules: 140 DAI 353 00, 140 DAI 453 00, 140 DAI 553 00, 140 DDI 353 00, and 140 DDI 853 00.
The following shows the dimensions for the 140 CFD 032 00 module.
The following figure shows the wiring for the 140 CFD 032 00 module.
NOTE:
-
The GND (ground) terminal points are not connected.
-
The terminal block commoning strip, Modicon # 140 CFX 001 10 (Qty. 10), can be used to jumper the power between groups.
