How to configure action when counter value = 0 or when crossing setpoint

At a Glance

This parameter defines the automatic reset mode of a TSX CTY2A /4A module’s counting register:

This configuration is defined in the Action when counter value = 0 or Action when crossing setpoint zone in the configuration screen.

Notes

These operations are similar to automatic preset or reset respectively. They do not require any preset or reset software enabling.
The setpoint values are defined in the adjustment screen.

Procedure

The following table summarizes the procedure for configuring the action when crossing zero values of the TSX CTY2A and 4A modules.

Step	Action
1	Open the module to be configured.
2	In the channel field: select the counter (i.e. the channel) concerned.
3	In the general parameters field: select the down counting function and the task. Result: the configuration screen appears.
4	In the Action when counter value = 0 zone, click on the button corresponding to the required option.
5	The configuration of the action when crossing counter value = 0 is complete. If there are no more parameters to configure, enable the new configuration. To do this: scroll down the Edit menu and select the Enable command.

Procedure

The following table summarizes the procedure for configuring the action when crossing high setpoint values of the TSX CTY2A and 4A modules.

Step	Action
1	Open the module to be configured.
2	In the Channel field: select the counter (i.e. the channel) concerned.
3	In the general parameters field: select the counting function. Result: the configuration screen appears.
4	In the general parameters field: select the task for the exchange of objects.
5	In the Action when crossing setpoint zone, click on the button corresponding to the required option.
6	The configuration of the action when crossing setpoint is complete. If there are no more parameters to configure, enable the new configuration. To do this: scroll down the Edit menu and select the Enable command.