Configuration Screen for BMX EHC xxxx Counting Modules
Original instructions
About us
At a Glance
This section presents the configuration screen for BMX EHC 0200 counting modules.
Illustration
The figure below presents the configuration screen for the BMX EHC 0200 module in modulo loop counter mode:
NOTE: When adding a BMX EHC 0200 in a local rack the defaut function is Frequency mode
Description of the Screen
The following table presents the various parts of the above screen:
Number
Element
Function
1
Tab
The tab in the foreground indicates the current mode. The current mode is therefore the configuration mode in this example.
2
Label field
This field contains the name of each variable that may be configured. This field may not be modified.
3
Symbol field
This field contains the address of the variable in the application. This field may not be modified.
4
Value field
If this field has a downward pointing arrow, you can select the value of each variable from various possible values in this field. The various values can be accessed by clicking on the arrow. A drop-down menu containing all the possible values is displayed and the user may then select the required value of the variable.
5
Unit field
This field contains the unit of each variable that may be configured. This field may not be modified.