The Concept Converter accepts applications using the following hardware platforms:
NOTE: The Concept Converter converts as far as possible the modules when equivalencies are existing. It is mandatory to check the result according to the process needs. The settings of the hardware modules (parameters) are not converted but set to default values and must be entered for each module in Control Expert. Channel objects are converted as far as possible. Nevertheless, the program may have to be adapted according to the different behavior with the original module.
Concept Quantum applications are converted to Control Expert Quantum applications.
NOTE: Concept Quantum applications cannot be converted to Control Expert Momentum applications.
With global conversion, Concept Compact applications are converted to Quantum applications with a default hardware configuration containing a CPU (140 CPU 534 14A/U) and a power supply (140 CPS 424 00).
With partial conversion (conversion wizard) it is recommended to prepare a Modicon M340 hardware configuration.
With global conversion, Concept Momentum applications are converted to Quantum applications with a default hardware configuration containing a CPU (140 CPU 534 14A/U) and a power supply (140 CPS 424 00).
With partial conversion (conversion wizard) it is recommended to prepare a Modicon M340 hardware configuration.
NOTE: It is not possible to recover an application from Concept to Control Expert Safety PLC. To build a safety system, refer to the Safety Manual.
