Slave configuration data
(Original Document)
At a Glance
The TSX PBY 100 module can read the configuration data from each slave with the aid of the SEND_REQ function.
Designation
Size
Description
Total length
word
total length of configuration information
%IW number
byte
total input data size in the %IW zone
%QW number
byte
total output data size in the %QW zone
Offset %IW
word
input data blocks offset in the %IW zone
Offset %QW
word
input data blocks offset in the %QW zone
Station Status
byte
refer to the Profibus DP standard
Watchdog Factor 1
byte
Watchdog Factor 2
byte
Min TSDR
byte
PNO_IDENTIFIER
word
Group Flags
byte
ID Address
byte
slave address on the bus
Modular slave
byte
value = 1 if the slave is a modular device value = 0 if the slave is a compact device
Slave active
byte
value = 1 if slave is active on the bus
value = 0 if slave is inactive on the bus
Size of parameters
word
parameter data block size for this slave
Configuration data size
word
configuration data block size for this slave
Size of data used
word
data used block size for this slave
Parameters
x bytes
parameter data block for this slave
Configuration data
x bytes
configuration data block for this slave
Data used
x bytes
block of data used for this slave