Management parameters: communication and operation reports
(Original Document)
At a Glance
Communication and operation reports form part of the management parameters.
NOTE: It is recommended that communication function reports always be tested after use and before being started again. On a cold start, it is imperative to check that all management parameters for communication functions are reset to 0.
Report
These messages are common to all requests.
Communication report (least significant byte)
Value
Meaning
16#00
Successful exchange
Operation report (most significant byte)
Value
Meaning
Request code + 16#30
Positive result
16#01
Non processed request
NOTE: OK value returned when a Modicon M340 CPU sends a MODBUS BROADCAST request
16#02
Successful response
16#03
Size of buffer too small
16#01
Stopping the exchange on timeout
16#02
Stopping the exchange on user request (CANCEL)
16#03
Incorrect address format
16#04
Incorrect destination address
16#05
Incorrect management parameter format
16#06
Incorrect specific parameters
16#07
Problem with sending to destination
16#08
Reserved
16#09
Size of reception buffer is insufficient
16#0A
Size of transmission buffer is insufficient
16#0B
No system resources: the number of simultaneous communication EFs exceeds the maximum that can be managed by the processor
16#0C
Incorrect exchange number
16#0D
No telegram received
16#0E
Incorrect length
16#0F
Telegram service not configured
16#10
Network module missing
16#11
Request missing
16#12
Application server already active
16#13
UNI-TE V2 transition number incorrect
16#FF
Message refused
NOTE: OK value returned when a TSX SCP ••• / TSX SCY ••• sends a MODBUS BROADCAST request
Operation report (most significant byte)
Value
Meaning
16#01
Lack of resource to the processor
16#02
Lack of line resource
16#03
Device missing
16#04
Line error
16#05
Length error
16#06
Communication channel faulty
16#07
Addressing errors
16#08
Application error
16#0B
No system resources: the number of simultaneous communication EFs exceeds the maximum that can be managed by the processor
16#0C
communication function not active
16#0D
Destination missing
16#0F
Intra-station routing problem or non-configured channel
16#11
Address format not handled
16#12
Lack of destination resource
16#FD
Invalid parameter