This page describes all the explicit exchange language objects associated with agent for Fipio communication that can be displayed or modified by the agent application program.
The table below shows the different explicit exchange word objects.
|
Object (1)
|
Function
|
Meaning
|
|
%MW\2.e\0.m.MOD.2
|
Module status
|
-
bit 0 = 1: defective module
-
bit 1 = 1: functional error (error between the processor and the module, adjustment or configuration error, etc.)
-
bit 2 = 1: terminal block fault (not connected)
-
bit 3 = 1: self-tests running
-
bit 4 = 1: reserved
-
bit 5 = 1: error in hardware or software configuration (the module present is not that declared in the configuration, the sub-modules are not compatible)
-
bit 6 = 1: module missing
-
bit 7 = 1: error in one of the sub-modules
|
|
%MW\2.e\0.m.c.2
|
Channel standard status
|
Byte 0:
-
bit 0 = 1: the inputs words are not valid if the manager is in RUN
-
bit 1 = 1: the output words are not valid if the agent is in RUN
-
bit 4 = 1: internal fault on the TSX FPP 10 card or card not yet started by the manager
-
bit 5 = 1: configuration fault (the configured module is different from the one connected)
-
bit 6 = 1: Fipio communication fault
-
bit 7 = 1: application fault (%MW table overflow)
Byte 1: reserved
|
|
|
|
Key
|
|
(1)
|
Address 2.e\0.m.c.d
-
2 : corresponds to the bus number
-
e: corresponds to the connection point number
-
0 : corresponds to the (virtual) rack number
-
m: corresponds to the module position number
-
c: corresponds to the channel number
-
d: corresponds to the channel data
|
