How to Access Different Parameters Depending on the Type of Device
(Original Document)
About us
How to Access Inputs/Outputs
The following procedure shows how to access the input or output parameters of a module. It can be used in both offline and online mode.
Step
Action
1
Access the configuration screen of the Fipio device.
2
Select the Configuration tab.
3
Select the channel which corresponds to the inputs or the outputs or the inputs/outputs in the module area
Result: the configuration screen corresponding to the input/output type is displayed in the configuration area.
How to Set the Configuration Parameters
The following procedure describes how to modify the configuration parameters of a module. It can be used in both offline and online mode.
Step
Action
1
Access the configuration screen of a Fipio device.
2
Select the Configuration tab.
3
Select the channel in the module area.
4
Depending on the type of device, you can do the following in the configuration area:
  • check or uncheck a box and/or,
  • select a value from a drop-down list and/or,
  • modify a value directly.
5
Confirm by pressing Enter.
How to Assign a Module to a Control Expert Task
The following procedure shows how to assign a module to a Control Expert task. It can be used in offline mode only.
Step
Action
1
Access the configuration screen of a Fipio device.
2
Select the Configuration tab.
3
Select the channel in the module area.
4
In the General parameters area, select Task → MAST or FAST.