Details of the Explicit Exchange Objects for the T_CPT_FLM

At a Glance

This section presents the explicit exchange objects for the T_CPT_FLM_IN2 - type IODDT which are applicable to the channels of the BMXETM0200H module. They includes word type objects whose bits have a specific meaning. These objects are described in detail below.

NOTE:

in general, the meaning of the bits is given for bit status 1.
not all bits are used.

Exchange Status: EXCH_STS

The table below presents the bits of the channel exchange status word EXCH_STS (%MWr.m.c.0).

Standard symbol	Type	Access	Meaning	Language object
STS_IN_PROG	BOOL	Read	Status parameter read in progress	%MWr.m.c.0.0
ADJ_IN_PROG	BOOL	Read	Adjust parameter exchange in progress	%Mwr.m.c.0.2
RECONF_IN_PROG	BOOL	Read	Reconfiguration in progress	%MWr.m.c.0.15

Channel Report: EXCH_RPT

The following table presents the bits of the channel exchange word EXCH_RPT (%MWr.m.c.1).

Standard symbol	Type	Access	Meaning	Language object
STS_ERR	BOOL	Read	Error while reading channel status	%MWr.m.c.1.0
ADJ_ERR	BOOL	Read	Error while adjusting the channel	%Mwr.m.c.1.2
RECONF_ERR	BOOL	Read	Error while reconfiguring the channel	%MWr.m.c.1.15

Channel Faults: CH_FLT

The table below presents the bits of the channel faults word CH_FLT (%MWr.m.c.2).

Standard symbol	Type	Access	Meaning	Language object
EXTERNAL_FLT_INPUTS	BOOL	Read	External error on inputs	%MWr.m.c.2.0
EXTERNAL_FLT_OUTPUTS	BOOL	Read	External error on outputs	%MWr.m.c.2.1
INTERNAL_FLT	BOOL	Read	Internal error: channel inoperative	%MWr.m.c.2.4
CONF_FLT	BOOL	Read	Hardware or software configuration error	%MWr.m.c.2.5
COM_FLT	BOOL	Read	Bus communication error	%MWr.m.c.2.6
APPLI_FLT	BOOL	Read	Application error	%MWr.m.c.2.7

Channel Faults Special: CH_FLT_SP

The table below presents the bits of channel faults special word CH_FLT_SP (%MWr.m.c.3).

Standard symbol	Type	Access	Meaning	Language object
SENSOR_SUP_FLT	BOOL	Read	Low input power supply for the sensors	%MWr.m.c.3.2
ACTUATOR_SUP_FLT	BOOL	Read	Low input power supply for the actuator	%MWr.m.c.3.3
MPU_BROKEN_LINE	BOOL	Read	Broken line to MPU detected	%MWr.m.c.3.4
SHORT_CIRCUIT_OUTPUT	BOOL	Read	Output short circuit or overload detected	%MWr.m.c.3.5