Overview

When you edit an M580 control project, certain configuration parameters are unavailable. You need to configure the corresponding attribute in the Topology Manager instead.

This topic lists the parameters of Control Expert Classic that are unavailable and that have a different name in the Topology Manager.

List of Parameters

Module/Service

Parameter name and/or location in Control Expert Classic

Attribute name and/or location in the PROPERTIES of the Topology Manager

CPU

ServicePort\Service Port and Service Port Mode

Configuration\Physical Ports\ETH1 = Enabled and Service Port Mode

CRA IP address configuration

Configuration\Interfaces\Embedded Interface when you select the CRA adapter module

BMECRA31310

CRA adapter module configuration\Parameters\ IP Address Redundant CRA

Configuration\Interfaces\Embedded Interface\MainIP when you select the redundant CRA adapter module

BMENOC03•1

DTM\Channel Properties\Switch

Configuration\Physical Ports

DTM\Services\Service Port

Configuration\Physical Ports\ETH1

DTM\Services\Network Time Service

Services\NTP State

BMENOC0321

DTM\Services\IP Forwarding

Configuration\Physical Ports\BKP= Enabled and Interface = Enabled

DTM\Services\IP Forwarding\Control Network

Configuration\Interfaces\Embedded Interface\MainIP

DTM\Services\IP Forwarding\Fieldbus Network

Configuration\Interfaces\BKP_Interface\IP Address

DTM\Services\IP Forwarding\Extended Network

Configuration\Physical Ports\BKP= Enabled and \ETH1\Interface= Enabled and Interfaces\ETH1_Interface\IP Address

BMENUA0100

IPConfig\Control Port\IPv4

Configuration\Interfaces\Embedded Interface\IPv4 A

IPConfig\Backplane Port\IPv4

Configuration\Interfaces\BKP_Interface\IPA

BMENUA0100

IPConfig\Fast Sampling Rate

Services\OPC UA\Sampling Rate

IPConfig\OPCUA TCP Listening Port

Services\OPC UA\OPCUA TCP Listening Port

Module or DTM\Security

Enforce Security

Security\Security Level = Enforced

Unlock Security

Security\Security Level = No

Access Control = Enabled

Security\Services\Access Control = Enabled and click Edit

Pre-Shared Key

Security\Secure Protocol = IPsec

DHCP

Services\Address Server

Services\DHCP Client\DHCP Server Name and DHCP VIEW

Device Name (including Tens and Ones parameters)

Services\DHCP Client\Identifier

Project Settings\General\Configuration\Device name prefix for DHCP Address Server

Services\DHCP Server\DHCP Prefix

DTMs

Advanced Configuration (to open the DTM. May vary by device.)

Device context menu and select Open.

For devices managing fieldbusses, edit the fieldbus first.

DTM context menu\Device menu\Additional functions

Device context menu, select Open, and Additional Functions button.

For devices managing fieldbusses, edit the fieldbus first.

I/O scanning

DTM\Device List\Device X\Properties\Number

Add device I/O profile to scanner in Communication Mapping view and select active I/O profile and Device Number

DTM\Device List\Device X\Properties\Active Configuration

Add device I/O profile to scanner in Communication Mapping view

DTM\Device List\Device X\Properties\IO Structure Name\Structure Name

I/O Profile\Profile Name X\Type Name

DTM\Device List\Device X\Properties\IO Structure Name\Variable Name

I/O Profile\Profile Name X\Instance Name

Item mapping

DTM\Device List\Device X\Properties\Items Management\Import Mode = Automatic/Manual

I/O Profile\Profile Name X\Mapping = Automatic/Manual

DTM\Device List\Device X\Properties\Items Management\Reimport Items

I/O Profile\Profile Name X and change Mapping from Manual to Automatic

Scanner\local slaves

DTM\EtherNet/IP Local Slaves\Local Slave X\Active Configuration (adapter project)

I/O Profile\Select DTM Reference and add local slave.

When the local slave is deleted, Active Configuration is set to false in the control project.

DTM\EtherNet/IP Local Slaves\Local Slave X\Items (scanner and adapter projects)

I/O Profile\Select DTM Reference and add local slave and Local Slave X\Mapping = Manual and click Edit (for adapter only)

Syslog server

Project Settings\General\PLC diagnostics\PLC Event Logging

Services\Syslog Server\Enabled