Compatibility

Applications created with EcoStruxure™ Control Expert software are compatible with BMENUA0100 module firmware as follows:

BMENUA0100 Firmware Version

EcoStruxure™ Control Expert Software Version

14.0

15.0

1.01

Fully compatible

Only legacy features of firmware version 1.01 are supported by software1, 2, 3

1.10

Fully compatible

Fully compatible

1. If a BMENUA0100 module with firmware version 1.01 receives an application generated with EcoStruxure™ Control Expert V15 where:

  • Fast sampling rate is Activated (in the IPConfig tab), this setting will not be implemented.

  • IPv4 is de-activated for the control port, the module control port will be configured with the IPv4 address that appears grayed-out in the IPConfig tab for the module.

    NOTE: The grayed-out IPv4 address can be the most recently user-input IPv4 address, or the IPv4 address automatically input by the EcoStruxure™ Control Expert software (172.16.12.1) if no IPv4 address was previously entered.

  • NTP has been configured with an IPv6 address, the module web pages mistakenly indicate NTP is operational when the NTP service actually is not operational.

2. If two BMENUA0100 modules with firmware version 1.01 are configured in a Hot Standby rack with EcoStruxure™ Control Expert V15, the limitations described in the preceding items also apply to these modules.

3. If SNMP is enabled in Control Expert, include the IPv4 address of the SNMP manager in the SNMP tab for the BMENUA0100 module so that the SNMP manager can access the SNMP MIB.

NOTE: The BMENUA0100 web pages will be the same for all applications, regardless of the specific BMENUA0100 reference selected. As a result, the web pages displayed for the BMENUA0100 module depend on the module's firmware version (for example version 1.01, 1.10 or 2.01) and not the module version (for example not BMENUA0100 or BMENUA0100.2).