Introduction

Use the debugging screen to diagnose an Ethernet port on the BMENOR2200H module.

Address Information

Parameters

These debugging parameters for TCP/IP utilities in the BMENOR2200H module appear on the module Debug screen:

Field

Description

MAC address

BMENOR2200H module’s MAC address

IP address

BMENOR2200H module’s IP address

Subnetwork mask

BMENOR2200H module’s subnetwork mask address

Gateway address

BMENOR2200H module’s gateway address

LED Display

Observe these LEDs in the upper-right window corner for conditions related to the module:

Location

LED

Description

upper-right window corner

Run

on: The module is operating normally.

off: The PLC is not configured.
Error tab

ERR

on: A configuration or system error is detected.

off: The module is operating normally.
Problem descriptions:

  • detected internal problem

  • detected configuration problem

  • detected communication error

  • detected application problem

  • detected configuration error

  • Ethernet disabled

  • duplicate IP address

  • link disconnection

  • awaiting IP address

  • storm detection