Configuring the Module Name
Original instructions
About us
Overview
Use the Configuration tab of the BMENOP0300 module properties window to configure the module name.
The following steps present one example of how to configure the module name. Your own project configuration may differ.
Naming the Module
Follow these steps:
Step
Action
1
Double-click the BMENOP0300 module in the PLC bus window or right-click the module and select Open Module.
Result: The BMENOP0300 configuration dialog opens.
2
Select the respective channel in the left pane and select the Configuration tab.
3
Enter a Module name: an ASCII string up to a maximum of 10 characters.
NOTE: The beginning character cannot be an Arabic numeral.
4
Click the Validate icon in the Toolbar.
Result: A message opens informing you that the module name cannot be edited after validation.
5
Click OK to close the message.
Result: The Module name becomes read-only.
The maximum size of all BMENOP0300 module memory items is 8,000 words. The actual size is determined by the specific module configuration.
Refer to the topic Working with IEC 61850 Data Objects for information about the data items automatically created by Control Expert when you click Update application.