IP Forwarding Diagnostics
Original instructions
About us
Diagnosing the IP Forwarding Service
Use the IP Forwarding page to display dynamically generated data describing the IP forwarding service of the BMENOC0321 module.
NOTE: Before you can open the diagnostics page, make the connection between the DTM for the target communication module and the physical module.
Open the page:
Step
Action
1
In the DTM Browser, right-click the BMENOC0321 module to open a pop-up menu.
2
In the menu, select Device menu → Diagnostic. The Diagnostic window opens.
3
In the left pane of the Diagnostic window, select the communication module node.
4
Click on the IP Forwarding tab to open that page.
IP Forwarding Diagnostic Parameters
This table describes the parameters to diagnose the IP Forwarding service:
Parameter
Description
Refresh Every 500ms
Select this to dynamically update this page every 500ms. The number of times this page has been refreshed appears immediately to the right.
Forwarding Status
Status of the IP Forwarding service:
  • 1: enabled
  • 0: disabled
Current Forwarding Load
The total load handled by the IP Forwarding service (in packets per second).
Network Destination
These entries in the network routing table are associated with the IP forwarding network configuration.
Net Mask
Gateway Address
IP Interface